Questions And Answers

Your Questions About SpaceDesignX.

SDX Zynora, Rezolve, TrueSpace and ESG, file formats, security and support. Each answer links to the page that covers it in depth.

SDX Zynora · Code Compliance And Permit Approval

What Is SDX Zynora?

SDX Zynora is an intelligent compliance platform for building permits: it uses AI to read building codes and regulations from any jurisdiction into machine-readable checks and validates open-standard IFC models against them automatically. Reviewers open the submission in 3D and on 2D plans in the browser, confirm each result, raise comments as tracked issues and record a decision for every review round. SDX Zynora

Which Jurisdictions And Building Codes Does SDX Zynora Support?

Any jurisdiction and any building code. Our data preprocessing pipelines and machine learning models turn regulatory documents, such as building codes, zoning by-laws, fire and accessibility standards, into structured, machine-readable checks. A new jurisdiction is onboarded from its own documents with minimal manual configuration, and its experts review and approve the checks before they run. Regulatory Intelligence

How Does Automated Compliance Validation On IFC Models Work?

Each machine-readable check runs against the elements of the submitted IFC model: distances, heights, areas, widths, counts and the relations between spaces. Every result shows the clause, the measured value and Pass, Review or Fail, and links to the elements it measured. Reviewers confirm or overrule a result with a reason, so people keep the decision. Automated Compliance Validation

How Does A Design Submission Get Reviewed And Approved?

The design team uploads the model as a new version of the project. Reviewers are invited, examine it in 3D, on dimensioned plans and in Walk Mode, and raise issues with an owner, a priority and a status. When the round is complete, an approver records the decision and the reason. A resubmission is compared with the previous version. How Review And Approval Works

Can Authority Reviewers And External Consultants Take Part Without Installing Software?

Yes. Everything runs in a web browser. An administrator invites each reviewer with a one-time link, and the person's role decides what they may see and do. External reviewers see only the projects of their own organisation. Reviewers And Roles

How Are Review Comments Tracked And Sent Back To The Designers?

Each comment is an issue with an owner, a priority and a status (open, assigned, in progress or closed), tied to the element it is about. Issues are exported as BCF, the open issue format, so designers see each one with its viewpoint in their own modelling tools. Issues And BCF

Is Every Review Decision Recorded?

Yes. Each decision keeps who made it, when, and the reason, for every review round, so the approval history of a design can be shown at any later date. The Decision Record

Can SDX Zynora Check A Design Against The Building Code?

Yes. The requirements an authority applies, such as setbacks, building height, plot ratio, exit widths and parking ratios, are kept as checks that the authority's own experts set and edit. Every submission is measured against them, and each result shows the clause, the measured value and Pass, Review or Fail, so the reviewer confirms a result instead of measuring it again. SDX Zynora

How Are Resubmissions Compared With The Previous Round?

The revised model is imported as a new version and compared with the one before it. SpaceDesignX shows what is new, what was resolved and what is unchanged, so reviewers spend their time on what changed instead of reading the whole design again. Version Comparison

Does The AI Make The Permit Decision?

No. Artificial intelligence reads the building code into machine-readable checks and the engine measures the IFC model against them, but people decide. The jurisdiction's experts approve every check before it runs, reviewers confirm or overrule each result with a reason, and an approver records the decision for the round, with who, when and why. SDX Zynora

How Is SDX Zynora Different From Traditional Plan Review?

Traditional review reads drawings and PDFs and measures setbacks, heights and widths again by hand in every round. SDX Zynora measures the Industry Foundation Classes (IFC) model itself against machine-readable checks, links every result to the elements it measured, keeps comments and decisions in one record, and opens in the browser for every party, so a second round only looks at what changed. Four Advantages Of SDX Zynora

Can Design Teams Run The Code Checks Before They Submit?

Yes. The same machine-readable checks the reviewer uses can run on the design team's own model while the design can still change, so a missing accessible toilet or a narrow exit stair is fixed before submission instead of being returned in a review round. SDX Zynora

SDX Rezolve · Clash Detection

What Is Clash Detection In BIM?

Clash detection finds the places where elements of a building model occupy the same space, such as a duct passing through a beam. It runs on the combined model of every discipline, so the problem is found on screen during design instead of on site, where fixing it costs far more. SDX Rezolve

What Is AI Clash Detection, And How Is It Different From Traditional Clash Detection?

AI clash detection goes beyond listing overlaps. Traditional tools report every geometric overlap and leave the sorting to people. SpaceDesignX classes each clash as Major, Minor or Expected with a 0 to 100 severity and its reason, collects related clashes into Clash Groups, and proposes a fix that is checked against the whole building. Traditional Vs AI Clash Detection

What Are Hard Clashes, Soft Clashes And Workflow Clashes?

A hard clash is two solid elements in the same space, a soft clash breaches a required clearance, and a workflow clash is a conflict in schedule or sequence. SpaceDesignX checks hard clashes, within each file and between disciplines, and grades each as Major, Minor or Expected. Clearances are measured too, against distances your team sets per pair of disciplines; construction sequence is outside the clash check. SDX Rezolve

What Do Major, Minor And Expected Mean?

Major clashes need a person: a duct through a load-bearing wall with no opening, for example. Minor clashes are zero clearance or an overlap within drawing tolerance. Expected clashes are by design, such as a pipe through its own sleeve. Each gets a severity from 0 to 100 and a plain reason, and Expected ones stay out of the problem counts. How Clashes Are Judged

What Is A Clash Group?

A Clash Group is a set of clash pairs that share one cause, such as ductwork passing through one slab. Deciding once for the group settles all of its pairs, which turns hundreds of rows into a short list of decisions. Clash Groups

What Is A Clash Matrix?

A clash matrix is a grid showing how many clashes each pair of disciplines has, for example Structure against Mechanical. The SpaceDesignX Discipline Matrix checks every discipline against every other, so coordinators see where the trouble concentrates before they open a single clash. Multi-Disciplinary Coordination

How Does SpaceDesignX Avoid False Positives?

By recognising what is intended. Planned openings, sleeves, a socket in its own wall and two parts of one pipe system meeting at a joint are classed Expected, with the reason, and are left out of the problem counts. The thresholds behind each verdict are settings that your own experts can change. Traditional Vs AI Clash Detection

What Is Headless Clash Detection?

Headless clash detection runs on the server instead of on someone's desktop. Upload the IFC files and the check runs in the background in the cloud; the results are ready in the browser without anyone opening the model or keeping a laptop awake. Headless Clash Detection

How Long Does A Clash Check Take?

Seconds to minutes, even for hospital-scale models with tens of thousands of elements. The check runs in the cloud in the background, and the model can be opened and viewed while it runs. How It Works

Can AI Resolve Clashes Automatically?

AI proposes, the engine checks, and a person decides. For a clash, SpaceDesignX finds the move that clears it while creating the fewest new clashes, checks that move against every element in the building and shows the building before and after. A person reviews it and saves it with the issue. SDX Rezolve

Does The AI Change My Model Files?

No. Your IFC files are never edited. A proposed fix is saved with its clash and issue and travels to the designers as a BCF issue, so the change itself is made in your own modelling tool. Open BIM Standards

Does SDX Rezolve Check Clearances As Well As Hard Clashes?

Yes. Besides hard clashes, SDX Rezolve measures the gaps between elements against clearance rules per pair of disciplines, for example 50 mm between structure and ductwork. Your team sets the distances, and a stricter rule asks for the check to run again rather than missing pairs. SDX Rezolve

Does SDX Rezolve Work With Our Existing Tools?

Yes. It reads Industry Foundation Classes (IFC) models exported from any BIM authoring tool and sends issues back as BCF, so designers see each one with its viewpoint in their own software. Clash lists also leave as a spreadsheet and a PDF report, so nobody has to change tools to take part. Interoperability

SDX TrueSpace · Defects And Handover

What Does SDX TrueSpace Check?

SDX TrueSpace covers quality from the model to the finished building. Every model version is checked for geometry clashes, elements duplicated across files, and element data that is missing or inconsistent. Findings are classed, scored and assigned to an owner. As-built checks compare the model with a laser scan of the real building. SDX TrueSpace

How Are Defects Recorded And Tracked In SDX TrueSpace?

Each defect is pinned to its place in the model or on the floor plan, with a photo, a description, the trade responsible, a priority and a status. Defects are assigned to the right contractor, followed to closure and counted by floor, trade and age, so the snag list is always current and nobody works from an old spreadsheet. SDX TrueSpace

What Does The Digital Handover Include?

The verified as-built model, the asset register with each asset's data, operation and maintenance manuals linked to their systems, test certificates and warranties with their expiry dates. TrueSpace shows how complete each part is, so missing items are chased before handover. SDX TrueSpace

Can We Set Our Own Quality Checks?

Yes. Checks and thresholds are settings that your own experts edit. They decide what counts as Major, which findings become issues and who the issues go to. SDX TrueSpace

How Does LiDAR Scan Vs Model Verify What Was Built?

SpaceDesignX aligns a laser scan (LAS, LAZ or E57) with the model and measures every element against the scanned surfaces. Each element is marked Matches, Off, Not Found or Not Scanned against a tolerance your team sets, and Off elements show the distance and direction. LiDAR Scan Vs Model

Can We See Whether Quality Improves Between Model Versions?

Yes. Comparing two runs shows which clashes are new, which were resolved and which are unchanged, and the Analytics page shows clashes per version and issues over time. SDX TrueSpace

Which Laser Scanners Work With SDX TrueSpace?

Any scanner whose software can export LAS, LAZ or E57, the open point cloud formats, as well as text point files such as XYZ and PTS. The scan is lined up with the model automatically and can be fine-tuned by hand, and a newer scan replaces the old one as the site progresses. LiDAR Scan Vs Model

How Precise Is LiDAR Scan Vs Model?

Each element is measured against the scanned surfaces around it and judged against a tolerance your team sets, for example 10 mm. The result can only be as precise as the scan and its alignment, so every element that is off shows its distance and direction, and the alignment can be checked and adjusted. LiDAR Scan Vs Model

Why Pin Defects To The Model Instead Of A Spreadsheet?

Because a defect pinned to its element cannot be lost or misread. Everyone sees where it is in 3D or on the plan, which trade holds it and since when, and it is closed with a photo as proof. Managers count what is open by floor, trade and age without merging spreadsheets from site. SDX TrueSpace

Can Trades Use SDX TrueSpace On Site?

Yes, in the browser on a tablet, with nothing to install. Each trade sees only its own defects with the place, the photo and the deadline, adds a photo when the work is done and closes the defect for the site manager to check. SDX TrueSpace

DesignX ESG · Sustainability

What Is DesignX ESG?

DesignX ESG measures the sustainability of a building from its design model. It reads material quantities from the IFC model, estimates embodied carbon per element, floor, discipline and material, and summarises the result for the design team, the client and investors. DesignX ESG

How Is Embodied Carbon Measured From A BIM Model?

Embodied carbon is the greenhouse gas released to make and install a building's materials. From the model, SpaceDesignX reads the quantity of each element, such as volume or area, and applies a carbon factor for its material. The result is an estimate that is only as good as the quantities in the model and the factors used. DesignX ESG

Can We Compare The Carbon Of Design Options?

Yes. Import each option or revision as a version of the project, then compare the totals and the elements that carry the most carbon. Changes can be tested while the design can still move. DesignX ESG

Who Uses The ESG Results?

The design team uses them to choose lower-carbon options, the client to follow the targets, and investors to see a clear summary. The same figures are shared, so nobody works from a different spreadsheet. DesignX ESG

Which Carbon Factors Does DesignX ESG Use?

The factors your team sets for each material, from the database or environmental product declarations you work with. They are recorded with every result, so any figure can be traced to its element, its quantity and the factor used, and figures are always labelled as estimates. DesignX ESG

Can Government Authorities Use DesignX ESG?

Yes. Authorities that set embodied carbon or sustainability targets can receive the same model-based summary as the client, with the model version and the factors it came from, so a target can be checked against the design that was actually submitted. DesignX ESG

Does DesignX ESG Replace A Full Life Cycle Assessment?

No. DesignX ESG estimates embodied carbon from the model early, while the design can still change, to guide decisions. Where a certified whole-life assessment is required, it gives that work the model's own quantities as a traceable starting point. DesignX ESG

What Does The Model Need For DesignX ESG?

Elements with their materials and quantities, which most IFC models already carry. Elements without a material or a quantity are listed, so the design team can complete them instead of the figure silently leaving them out. DesignX ESG

Files, Formats And Access

Which File Formats Does SpaceDesignX Support?

IFC models (IFC2X3 and IFC4), BCF 2.1 for issues, and LAS, LAZ or E57 laser scans, plus text point files such as XYZ and PTS. Scaled plan sheets leave as PDF. Open BIM Standards

Does It Work With Models From Any BIM Authoring Tool?

Yes, through IFC, the open standard that every major authoring tool can export. No plug-ins and no special preparation of the model are needed, and issues go back to the designers as BCF to open in their own tools. Open BIM Standards

What Does One BIM. Every Team. Zero Complexity. Mean?

It is how SpaceDesignX works. One BIM: a single federated building model is the source of truth for every product. Every Team: architects, engineers, contractors, reviewers and owners work on that same model, each with their own view. Zero Complexity: it all runs in the browser on open IFC, with nothing to install and no specialist training needed. The Platform

Do I Need To Install Anything?

No. SpaceDesignX runs in a web browser on desktop and tablet, with nothing to install. Clash detection, plans, scans, Walk Mode and review all run from the browser. The Platform

How Large Can My Model Files Be?

Files of several hundred megabytes are routine, and a hospital model of tens of thousands of elements was checked in about 20 seconds in our tests (larger models take longer). For a very large set, or a limit that matters to your project, contact us before you start. Contact Us

What Are IFC, BCF And openBIM?

IFC (Industry Foundation Classes) is the open file format for building models. BCF (BIM Collaboration Format) is the open format for issues, carrying a comment, a viewpoint and the elements concerned. openBIM is the approach of exchanging data in open formats such as these, so teams can work in different tools. Open BIM Standards

Can I See 2D Floor Plans And Dimensions From My Model?

Yes. 2D floor plans are real horizontal cuts through the model, even when the IFC carries no drawings. One click adds overall sizes, wall dimensions, room sizes and areas, and door and window tags, and a scaled PDF sheet can be exported. Plans And Dimensions

Can I Walk Through The Model Or Review It In Virtual Reality?

Yes. Easy Walk Mode is a first-person walk that stays on the floor, climbs stairs and goes through every door, with a mini-map and a Next Clash button. Virtual Reality Mode puts you inside the same building at true scale. Walk Mode And Virtual Reality

Can I Ask Questions About The Model In Plain English?

Yes. Ask The Building answers plain-language questions about the model and its clashes, such as which clashes on Level 2 are Major. Every number and element in an answer comes from the building data, and the steps can be shown. Ask The Building

What Is IFC (Industry Foundation Classes)?

IFC, short for Industry Foundation Classes, is the open, vendor-neutral standard for describing a building and everything in it. It is developed by buildingSMART International and published by the International Organization for Standardization as ISO 16739-1. Every element has a class, such as a wall, beam, duct or door, with its geometry, properties and relations, and every major BIM authoring tool can export it. What Is IFC?

What Does Interoperability Mean In BIM?

Interoperability means that tools from different vendors can exchange building data without losing it. SpaceDesignX is interoperable by design: it reads IFC models from any authoring tool, sends issues back as BCF, reads laser scans as LAS, LAZ or E57, and exports PDF sheets and spreadsheets, so every partner keeps the software they already use. Interoperability

Why Is A Browser-Native Platform Better Than Desktop BIM Software?

Desktop tools are installed per machine, tied to one operating system and updated by hand, and outside reviewers often cannot open the model at all. SpaceDesignX runs in the browser on Windows, macOS, Linux and iPad, the heavy checks run on our servers, everyone is on the latest version, and a partner joins with an invitation link. Browser-Native Delivery

How Does SpaceDesignX Use Artificial Intelligence?

Artificial intelligence reads building codes into checks, explains clashes and proposes fixes, raises and assigns issues through the AI Coordinator, and answers questions about the building in plain English. The AI reasons, but the engine measures: every number, element and move shown comes from the model, and every AI fix is checked against the whole building first. How It Runs

What Happens To A Model When It Is Uploaded?

It goes through data preprocessing before anyone works on it: each file is checked, every element, property and quantity is read once, the discipline files are combined into one federated model, the relations between elements are mapped and the geometry is prepared to open in the browser. The original files are never changed. How It Runs

Teams, Security And Data

Who Can See My Project?

Only the people you give access. Roles and permissions are set per project, and the server checks them on every request, so a hidden button is never the only protection. Privacy Policy

Can People From Other Companies Join A Project?

Yes. External consultants and reviewers join by invitation. Each belongs to an organisation, sees only that organisation's projects, and has only the permissions their role gives. Reviewers And Roles

Can I Sign In With Google Or Microsoft?

Yes. People can sign in with a Google or Microsoft account, or with an email address and password. Accounts are created by invitation, so only the people you invite can sign in. Contact Us

Where Is My Data Stored, And Is It Secure?

Project data is stored on servers run for SpaceDesignX and travels over https. Every request is checked against the person's current role, so removing someone's access takes effect at once. Details are in the Privacy Policy. Privacy Policy

Can I Delete My Project And Its Data?

Yes. A project's owner or an administrator can delete a project and its data. How long other records are kept is set out in the Privacy Policy. Privacy Policy

Pricing, Demo And Support

How Much Does SpaceDesignX Cost?

Pricing is shared on request. Contact us or request a demo and we will prepare a quote for your projects. Request A Demo

Can I See SpaceDesignX On My Own Model?

Yes. Send us an IFC set you know well and we will run the checks on it live and walk you through what it finds. Request A Demo

How Do I Contact Support?

Email findus@spacedesignx.com, or call USA +1 213 820 4244 or Canada +1 979 326 9493 or Singapore +65 8034 7803 or Malaysia +60 16 718 7500. Contact

Still Have A Question?

Write to us or call, or send an IFC set you know well and we will show you the answers on your own model.